View Issue Details
|ID||Project||Category||View Status||Date Submitted||Last Update|
|0002620||Drawing||[FreeCAD] Bug||public||2016-07-13 15:35||2018-09-16 11:53|
|Platform||AMD 64 bit||OS||Linux Mint||OS Version||17.1|
|Target Version||Fixed in Version|
|Summary||0002620: Appears in both V0.16 and daily builds Drawing dxf export not working correctly|
|Description||From the Drawing workbench create a new drawing and insert some views. Do a file export and select the File type for the *.svg, *.svgz, *.dxf and enter a .dxf file name. Observe that the resulting dxf file is not correct. In my case it contains just a single rectangle that is not oriented correctly.|
Exporting with a .svg file name creates a properly exported file with the title block and all the views that are in the Page.
|Steps To Reproduce||Start FreeCAD|
Create a part model using the Part Design Workbench.
Switch to the Drawing Workbench
Insert a new drawing object
Make sure the created part is selected
Insert some new views of the part.
Do File->Export and select *.svg, *.svgz, *.dxf as the File Type from the drop down list
Enter foobar.dxf for the file name.
Save the file to complete the export.
Load the DXF file foobar.dxf with a program that views DXFs. Observe that it is not correct.
For a sanity test repeat the File->Export with the same File Type filter but this time export as foobar.svg
Load foobar.svg into a suitable program, e.g. Inkscape
Observe that the SVG exported properly.
|Additional Information||OS: Linux Mint 17.1 Rebecca|
Word size of OS: 64-bit
Word size of FreeCAD: 64-bit
Version: 0.17.7957 (Git)
Build type: None
Python version: 2.7.6
Qt version: 4.8.6
Coin version: 4.0.0a
OCC version: 6.8.0.oce-0.17
||Is this bug mis-classified? Is dxf export part of the Path workbench?|
||Forum thread: https://forum.freecadweb.org/viewtopic.php?f=10&t=20267|
||@wandererfan care to weigh in ?|
from forum discussion
>>I only did a quick check with Part Features, but I noted that:
- not all views in a page are in the dxf file
- the dxf file is missing the EOF record so the last view will not be imported by LibreCad<<
Is there a test file(s) available?
EDIT: botched link to forum discussion
||@burtbick do you have a test file?|
||DXF export exists in other Modules (Import, TechDraw, Draft(?). Use one of those modules.|
|2016-07-13 15:35||burtbick||New Issue|
|2016-10-16 01:18||mlampert||Note Added: 0007383|
|2016-10-22 20:19||yorik||Project||Path => Drawing|
|2017-01-27 03:23||Kunda1||Note Added: 0008015|
|2017-01-27 03:23||Kunda1||Status||new => feedback|
|2017-02-07 03:15||Kunda1||Tag Attached: DXF|
|2017-02-21 16:13||Kunda1||Relationship added||child of 0002882|
|2017-05-03 12:56||Kunda1||Relationship added||related to 0002536|
|2017-05-08 21:57||Kunda1||Relationship added||related to 0002621|
|2017-07-08 14:43||Kunda1||Note Added: 0009682|
|2017-07-08 15:38||wandererfan||Note Added: 0009685|
|2017-07-08 15:40||wandererfan||Note Edited: 0009685||View Revisions|
|2017-07-08 15:56||Kunda1||Note Added: 0009687|
|2017-10-10 02:31||Kunda1||Relationship added||related to 0002663|
|2017-11-25 01:27||wandererfan||Relationship deleted||child of 0002882|
|2018-09-16 11:53||wandererfan||Status||feedback => closed|
|2018-09-16 11:53||wandererfan||Resolution||open => won't fix|
|2018-09-16 11:53||wandererfan||Note Added: 0011756|