Part: Fuziune/Union

From FreeCAD Documentation
(Redirected from Part Union/ro)
This page is a translated version of the page Part Fuse and the translation is 56% complete.
Outdated translations are marked like this.

Part Union

poziția meniului
Part → Boolean → Union
Ateliere
Part
scurtătură
nici unul
Prezentat în versiune
-
A se vedea, de asemenea,
Part Cut, Part Common

Descriere

Unites (fuses) selected Part objects into one. This operation is fully parametric and the components can be modified and the result recomputed.

Note: This command is an automated form of the Boolean operation.

Cum se folosește

  1. Selectați două forme
  2. Apăsați butonul Part Union.
  1. Select two or more shapes
  2. There are several ways to invoke the command:
    • Press the Part Fuse button in the Part tools toolbar
    • Use the Part → Boolean → Union entry in the Part menu

Intrări suportate

Elementele de intrare trebuie să fie forme OpenCascade. Exemple: chestii realizate cu Atelierele: Part, PartDesign, Sketcher. Nu este vorba despre plase (cu excepția cazului în care acestea au fost convertite în forme) - pentru ochiurile de plasă, există unelte specifice Booleene în Atelierul de lucru MeshDesign.

  • Solid + Solid: the result is a solid that occupies all the volume covered by the inputs
  • Shell + Shell, Shell + Face, Face + Face: the result is a shell. Where faces intersect, they are split. Shells can be non-manifold. After fusion, faces can be united by Refining the result.
  • Wire + Wire, Edge + Wire, Edge + Edge: the result is a wire. Edges are split where they intersect.

Compounds are supported; however, it is assumed that shapes packed into a compound do not touch or intersect. If they actually do, Fusion will likely fail, or produce an incorrect result.

Options

Opțiuni

Elementele pot fi adăugate și scoase din fuziune/uniune, tragându-le în sau în afara funcției de siguranțe din arborele cu mouse-ul. Este necesară o recalculare manuală (apăsați tasta F5 sau faceți clic pe pictograma recompute) pentru a vedea rezultatele.

După această operație, este posibil să fie necesară curățarea formei RefineShape.