View Issue Details

IDProjectCategoryView StatusLast Update
0004062FreeCADBugpublic2019-07-22 14:34
ReporteropenBrain Assigned Towmayer  
PrioritynormalSeverityminorReproducibilityalways
Status closedResolutionfixed 
OSWindows only 
Product Version0.18 
Summary0004062: Incorrect behavior with Euler angles in Placement dialog
DescriptionWhen using Euler angles in Placement dialog, Roll angle is weirdly reset to 0° value.
This issue seems to be limited to Windows OS only.
No clue if all workbenches are affected or not ATM.
Both present on various 0.18 and 0.19 builds.
Forum thread
Steps To Reproduce
  1. Create a blank new model and select Part WB
  2. Add a torus then a cone (default settings)
  3. Select the torus in the tree view and open its Placement dialog
  4. In the Rotation group, choose "Euler angles" type then set Pitch=90° and Roll=90° and validate with OK
  5. Immediately reopen the Placement dialog => :? Roll angle is back to 0° while no change has been done (and no change is displayed)
TagsPlacement
FreeCAD Information

Activities

There are no notes attached to this issue.

Related Changesets

FreeCAD: master df058402

2019-07-22 14:31:42

wmayer

Details Diff
handle gimbal lock when converting between quaternion and Euler angles (issue 0004062) Affected Issues
0004062
mod - src/Base/Rotation.cpp Diff File

Issue History

Date Modified Username Field Change
2019-07-18 12:37 openBrain New Issue
2019-07-18 12:37 openBrain Tag Attached: Placement
2019-07-22 14:32 wmayer Changeset attached => FreeCAD master df058402
2019-07-22 14:34 wmayer Assigned To => wmayer
2019-07-22 14:34 wmayer Status new => closed
2019-07-22 14:34 wmayer Resolution open => fixed
2019-07-22 14:34 wmayer Fixed in Version => 0.19