View Issue Details

IDProjectCategoryView StatusLast Update
0003158PathBugpublic2018-01-29 20:01
Reportermlampert Assigned Tosliptonic  
PrioritynormalSeverityminorReproducibilityalways
Status closedResolutionfixed 
Product Version0.17 
Target Version0.17Fixed in Version0.17 
Summary0003158: Tool Cutting Edge Angle needs to be restricted to values 0° <= angle < 90°
DescriptionCurrently it is possible to add any angle, including negative angles. It is also an easy mistake for the user to manually double the angle and enter that error. All of the above lead to the wrong calculations, compensating most likely into the opposite direction.

One way of mitigating that problem is prevention of entering an invalid angle in the first place.
TagsNo tags attached.
FreeCAD Information

Activities

sliptonic

2018-01-29 20:01

manager   ~0010895

fixed in FreeCAD Pull Request 1269

Issue History

Date Modified Username Field Change
2017-08-13 22:58 mlampert New Issue
2018-01-29 20:01 sliptonic Assigned To => sliptonic
2018-01-29 20:01 sliptonic Status new => closed
2018-01-29 20:01 sliptonic Resolution open => fixed
2018-01-29 20:01 sliptonic Fixed in Version => 0.17
2018-01-29 20:01 sliptonic Note Added: 0010895