View Issue Details

IDProjectCategoryView StatusLast Update
0002665PartDesignBugpublic2017-08-21 14:23
Reportersmooker Assigned To 
PriorityhighSeveritycrashReproducibilityhave not tried
Status closedResolutionunable to reproduce 
PlatformAMD64OSDebianOS Version stretch/sid
Product Version0.17 
Target Version0.17 
Summary0002665: Crash trying to create a pocket from an unattached sketch
DescriptionTrying to make a pocket causes:
[smooker@sh2 ~/src/freecad-projects/proba]$ FreeCAD ./proba.fcstd
FreeCAD 0.17, Libs: 0.17R8161 (Git)
© Juergen Riegel, Werner Mayer, Yorik van Havre 2001-2015
  ##### #### ### ####
  # # # # # #
  # ## #### #### # # # # #
  #### # # # # # # # ##### # #
  # # #### #### # # # # #
  # # # # # # # # # ## ## ##
  # # #### #### ### # # #### ## ## ##

Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Can't find Origin for "Body"
Can't find Origin for "Body"
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
Gui::DocumentItem::slotChangedObject(): Group references unknown object.
TagsNo tags attached.
FreeCAD Information

Activities

smooker

2016-08-09 07:28

reporter   ~0007257

*** Abort *** an exception was raised, but no catch was found.
    ... The exception is:SIGSEGV 'segmentation violation' detected. Address 1c0

normandc

2016-08-14 20:06

manager   ~0007272

Please read the bug reporting guidelines. http://forum.freecadweb.org/viewtopic.php?f=3&t=5236

Unless you post a reproducible method for the crash, a file or any other relevant info, this bug report will be closed because it is utterly useless as it is.

wmayer

2016-08-15 08:02

administrator   ~0007274

I was able to reproduce the crash twice, but I couldn't find a way to get it reliable.

The point is that the behaviour has changed when trying to create a pocket from an unattached sketch.
In v0.16 and older it pops up a dialog that the sketch has no support face and does nothing further. In v0.17 it first opens the task panel (but the 3d view becomes empty) and after pressing the OK button the above error message appears.

Now I was able to get the crash:
* open two documents
* create a sketch on the one
* while the task dialog is open switch to the other document
* closing the task panel now doesn't destroy the invalid pocket feature

Now after some wild clicking it crashed for me two times but wasn't able to locate the reason.

Kunda1

2017-01-10 13:03

administrator   ~0007598

This ticket needs to be renamed to reflect the problem.

Kunda1

2017-02-07 02:34

administrator   ~0008228

Forum thread: https://forum.freecadweb.org/viewtopic.php?f=8&t=20519

Kunda1

2017-02-20 22:02

administrator   ~0008389

@normandc please check when you have a moment? Thanks!

Kunda1

2017-05-02 13:12

administrator   ~0008851

@normandc re-pinging JIC you didn't see the above ping.

normandc

2017-05-03 00:52

manager   ~0008877

I can't provide any help on this. wmayer is the one who could reproduce the issue.

abdullah

2017-05-24 22:53

manager   ~0009129

@kunda1

where is this file? proba.fcstd

I have tried also Werner's instructions without being able to reproduce.

Maybe the reporter could evaluate if this has been solved or not and provide a way to reproduce it if not solved?

Kunda1

2017-05-24 23:14

administrator   ~0009130

@smooker please try to reproduce with latest dev revision.
@wmayer perhaps you can as well?

Kunda1

2017-08-14 00:07

administrator   ~0009921

@wmayer please weigh in at your earliest convenience..thanks!

wmayer

2017-08-21 14:23

administrator   ~0009981

Can't reproduce it any more.

Issue History

Date Modified Username Field Change
2016-08-09 07:26 smooker New Issue
2016-08-09 07:28 smooker Note Added: 0007257
2016-08-14 20:06 normandc Note Added: 0007272
2016-08-15 08:02 wmayer Note Added: 0007274
2016-08-15 08:02 wmayer Status new => confirmed
2017-01-10 13:03 Kunda1 Note Added: 0007598
2017-01-11 19:41 Kunda1 Summary Crash => Crash trying to create a pocket from an unattached sketch
2017-02-07 02:34 Kunda1 Note Added: 0008228
2017-02-20 22:02 Kunda1 Note Added: 0008389
2017-05-02 13:11 Kunda1 Product Version => 0.17
2017-05-02 13:11 Kunda1 Target Version => 0.17
2017-05-02 13:12 Kunda1 Note Added: 0008851
2017-05-03 00:52 normandc Note Added: 0008877
2017-05-24 22:53 abdullah Note Added: 0009129
2017-05-24 23:14 Kunda1 Note Added: 0009130
2017-05-24 23:14 Kunda1 Status confirmed => feedback
2017-08-14 00:07 Kunda1 Note Added: 0009921
2017-08-21 14:23 wmayer Status feedback => closed
2017-08-21 14:23 wmayer Resolution open => unable to reproduce
2017-08-21 14:23 wmayer Note Added: 0009981