All Projects FreeCAD  Addon Manager  Arch  Assembly  Draft  Expressions  FEM  File formats  GCS  OpenSCAD  Part  PartDesign  Path  Project Tools & Websites  Raytracing  Robot  Sketcher  Spreadsheet  TechDraw

View Issue Details

Jump to NotesJump to History
IDProjectCategoryView StatusDate SubmittedLast Update
0002730FreeCADBugpublic2016-10-08 08:392017-01-30 15:22
Reportereephyne Assigned Toyorik  
PrioritynormalSeverityminorReproducibilityalways
Status closedResolutionfixed 
PlatformLinuxOSArch 
Product Version0.16 
Summary0002730: Fillet are not showed in drawing
DescriptionI can reproduce this everytime.

the fillet of parts are not showed in side view (but in isometric its there).

Its even more than that because where fillet should be there, it show everything behind. (you don't see it in my exemple but to see it symple replace the cylinder with a tube and you will see the inside)
Steps To ReproduceYou simply sketch a circle and extrude it. then make a fillet to one edge.

Then go to drawing, insert a new one and put a projection of the cylinder with fillet on it. The fillet show in iso view but not in side view
TagsOCC Bug, upstream
FreeCAD Information

Relationships

related to 0002354 closedyorik Drawing Arcs missing in projections of revolved sketches 
related to 0002383 closedyorik Drawing Drawing lines missing or incorrect 
child of 0001931 closedwmayer FreeCAD migration to OCCT 7.1 

Activities

eephyne

2016-10-08 08:39

reporter  

Capture du 2016-10-08 10-34-38.png (Attachment missing)

eephyne

2016-10-08 08:40

reporter  

Capture du 2016-10-08 10-22-29.png (Attachment missing)

wandererfan

2016-10-08 13:04

manager   ~0007348

This is a known problem with OCC. It has been reported:
https://tracker.dev.opencascade.org/view.php?id=27782

eephyne

2016-10-08 13:16

reporter   ~0007349

This concern every version/os/config or its relative to something that can be updated/modified ?

wandererfan

2016-10-09 12:18

manager   ~0007351

As far as I know, it affects all versions & platforms. There is a workaround that works sometimes - change your projection direction slightly, say from [0,1,0] to [0.01,1,0] (thanks to @aron)

Kunda1

2017-01-17 04:29

administrator   ~0007831

Upstream bug has been fixed in OCC 7.1
Made this ticket a child of 0001931

Kunda1

2017-01-25 22:25

administrator   ~0007989

Resolving based on comment from @triplus in https://forum.freecadweb.org/viewtopic.php?f=10&t=16952&start=50#p154772
> Both issues issue 0002730 and issue 0002354 where resolved and can be closed:
> [based on] https://forum.freecadweb.org/viewtopic.php?f=3&t=17015&start=10#p142531

Issue History

Date Modified Username Field Change
2016-10-08 08:39 eephyne New Issue
2016-10-08 08:39 eephyne File Added: Capture du 2016-10-08 10-34-38.png
2016-10-08 08:40 eephyne File Added: Capture du 2016-10-08 10-22-29.png
2016-10-08 13:00 wandererfan Relationship added related to 0002354
2016-10-08 13:00 wandererfan Relationship added related to 0002383
2016-10-08 13:04 wandererfan Note Added: 0007348
2016-10-08 13:16 eephyne Note Added: 0007349
2016-10-09 12:18 wandererfan Note Added: 0007351
2017-01-17 04:26 Kunda1 Tag Attached: OCC Bug
2017-01-17 04:26 Kunda1 Tag Attached: upstream
2017-01-17 04:28 Kunda1 Relationship added child of 0001931
2017-01-17 04:29 Kunda1 Note Added: 0007831
2017-01-25 22:25 Kunda1 Note Added: 0007989
2017-01-25 22:25 Kunda1 Status new => resolved
2017-01-25 22:25 Kunda1 Resolution open => fixed
2017-01-25 22:25 Kunda1 Assigned To => Kunda1
2017-01-25 22:25 Kunda1 Assigned To Kunda1 =>
2017-01-30 15:22 yorik Status resolved => closed
2017-01-30 15:22 yorik Assigned To => yorik